|
|
INDUSTRIAL
FOOD TECHNOLOGY – IFT Series
|
Pressure Homogeniser - FT9
The laboratory homogeniser uses a unique
double action valve that gives a dispersion
index of less than five per cent. Small
test samples can be prepared under different
operating pressures for demonstrating
the homogenisation process.
|
|
Reverse Osmosis/Ultrafiltration Unit -
FT18
A small scale laboratory test unit allows
experimentation in the range of clarification
and concentration processes. The effect
of varying process parameters on membrane
separation performance can be demonstrated.
The unit is fully self-contained and has
a clean-in-place facility.
|
|
Rising Film Evaporator - FT22
A floor standing unit uses the steam-heated,
climbing film principle to concentrate
small quantities of liquid foods either
continuously or in batches. The important
process variables can be varied and monitored.
|
|
Multi-purpose Processing Vessel - FT40
Batch heating, chilling and emulsifying
processes can be demonstrated on this
versatile processing vat. A built-in chart
recorder continuously records the temperature
of the vat contents and separate process
controls allow accurate preparation of
small samples of product.
|
|
Laboratory Process Chiller - FT63
A recirculating process chiller that
provides a continuous supply of chilled
liquid to serve as the cooling fluid when
used with an Armfield miniature scale
processing unit.
|
|
High Performance HTST/UHT Units for Processing
Liquids - FT74X
Both plate and tubular heat exchanger
are interchangeable on a common self-contained
mobile service unit. All combinations
of temperature and time in the UHT region
of sterilisation can be attained. The
unit is ideal for both teaching and research.
Real time evaluation and computer interfaced
logging via Windows speed process comparisons.
|
|
Direct Steam Injection UHT System - FT74DI
Direct steam injection enables higher
temperatures to be reached faster and
dropped faster keeping product out of
the flavour and colour danger zone. The
FT74DI reaches up to 150°C at pressures
up to 9 bar and product can be held from
two seconds upwards. Throughput is up
to 20 litres (5 US gallons) per hour.
It can handle sauces, soups, condiments,
confectionary, dairy products, gelatine,
ice cream, pharmaceuticals and much more.
|
|
Tall Form Spray Dryer FT80 Spray Chiller
FT81
A laboratory scale drier that can handle
very small amounts of product (2-7 litres
an hour). The functional properties of
the powders produced will be comparable
to those produced by large scale equipment.
Control and instrumentation make it supremely
flexible with operator control over pressures,
temperature and relative humidity. A fluid
bed cooler for second stage cooling of
high fat products being spray dried is
available.
A conversion kit can turn the FT80 into
the FT81 Tall Form Spray Chiller capable
of handling high fat products such as
bakery shortenings. The change can be
made in less than 30 minutes.
|
|
Aseptic Filling System - FT83
The Armfield FT83 is the most cost effective
solution for R&D departments to produce
sterile packaged samples with an excellent
shelf life. As well as a working chamber
with a controlled, clean environment,
the unit includes the facilities to allow
all the product paths to be sterilised
and for the filling to be controlled in
a simple manner.
|
|
Homogenisation Sub-System - FT90/91
NOW WITH PULSATION
DAMPERS AS STANDARD
The FT90 and FT91 are complete
in-line homogenisation sub-systems for
use with Armfield miniature scale food
processing equipment.
The FT90 is based on an APV
1000 homogeniser and the FT91 is based
on a Niro Twin Panda. Both homogenisers
have been specifically optimised
for this application.
The units include controls, comprehensive
instrumentation, valves, pipework, pulsation
dampers, datalogging and all facilities
required for operation and process integration
with other Armfield equipment.
|
|
Miniature Scale HTST/UHT Mini Pilot System
- FT94X
The Armfield FT94X HTST/UHT Mini Pilot
system extends the range of continuous
operation scaled-down units offered by
Armfield to 30-100 L/h. The unit combines
full flexibility – plate and tubular
heat exchanger options - with comprehensive
instrumentation demanded of research and
development equipment.
The FT94 is designed for operation as
both a stand-alone unit and also for seamless
integration into a full processing system
with the capability of aseptic packaging
of processed product.
|
|
Carbonator/Filler - FT102x
Armfield Limited announces the FT102X
Carbonator-Filler miniature-scale drinks
carbonator and filler for laboratory
development of carbonated beverages,
soft and alcoholic drinks where results
need to be recorded, reproduced and then
replicated on large scale plant.
The FT102X Carbonator-Filler allows
very small quantities of product (as
little as two litres) to be accurately
mixed, carbonated and bottled in glass
or PET bottles or canned. Precise control
over mixing and carbonating makes the
process quick and easy. With the clean
in place facility many formulations can
be tried in a short time.
When used with one of Armfield's miniature-scale
FT74 heat exchangers, researchers can
pasteurise or sterilise then carbonate
and can or bottle in the laboratory.
|
|
Benchtop Rapid Extractor - FT110
The Armfield FT110 Benchtop Rapid Extractor
is used to extract the active constituents
from small (1 litre) samples of materials.
The Armfield FT110 uses high pressure
and a combination of both static and
dynamic extraction phases to achieve
a rapid extraction of the active materials
with minimum degradation to the product.
In the dynamic phases, the solvent is
passed through the material providing
a forced percolation and agitation.
|
|
Laboratory Scale Rapid Extractor - FT111
Ideally suited to product development
purposes, the Armfield FT111 Laboratory
Scale Rapid Extractor is used to extract
the active constituents from materials
in laboratory scale batch sizes.
|
|
tel: +44 1425 478781